Download Oneplus 6 Stock Firmware [Flash File]

Oneplus 6 Official Rom (Flash File) for repairing your device if you have experienced bootloop, System errors, Unbrick dead after flash, Screen Lock, Pattern Lock, FRP / Google Account, hanging and dead problems. Flash Stock Firmware using Updater or Adb Fastboot.

Oneplus 6 Official Firmware Update (Full OTA)

Firmware Information
File Name	OnePlus6Oxygen_22.J.54_OTA_054_all_2105112236_1ff2589108822e6.zip
Software Version	OxygenOS 10.3.11
ROM Type	OTA File
File Size	1.82 GB
Flash Method	Using Updater/Adb Fastboot
Download
File Name	OnePlus6Oxygen_22.J.53_OTA_053_all_2104202241_ecefb.zip
Software Version	OxygenOS 10.3.10
ROM Type	OTA File
File Size	1.82 GB
Flash Method	Using Updater/Adb Fastboot
Download
File Name	OnePlus6Oxygen_22.J.52_OTA_052_all_2103022341_f3ff04643ea24e51.zip
Software Version	OxygenOS 10.3.9
ROM Type	OTA File
File Size	1.82 GB
Flash Method	Using Updater/Adb Fastboot
Download

How to Install Official ROM on OnePlus 6:

1. First of all enable the Developer Option, To Enable the Developer Option, Go to your Settings => About => Software Information => More => Now Tap on the Build Number 7-8 Times until you see a toast message "Developer option enabled".
2. Download Official Stable OxygenOS For Once your developer option is active, Go back to your settings => Open developer option => Enable USB Debugging.
3. Download and Install ADB and fastboot driver for your PC.
4. Extract the OxygenOs.Zip file.
5. Copy the Extracted OxygenOs zip to the folder where adb installed.
6. Reboot your phone into recovery mode. To do this, shut down your device and turn it back on while holding the power and volume down buttons simultaneously.
7. In recovery, choose "Install from USB" option in the recovery screen, tap OK to confirm. A screen with "You are in sideload mode" will be displayed.
8. Connect your phone to PC using the USB Cable.
9. Now in your PC, open the extract ADB Fastboot folder and Press and hold Shift key and Right click on your mouse to open the command prompt window.
10. Now type the command in your command window.
11. "adb devices"
12. If you see a pop up to allow USB Debugging on your phone, Click OK.
13. Now flash the OxygenOSZip file using the below command. (filename is the downloaded zip file name)
14. "adb sideload <filename>"
15. Wait a while, your phone should now update to the selected build and reboot automatically to take you into OxygenOS.

Disclaimer:

Don't forget backup all data and files on your phone before flashing or installing the stock rom. As this helps you to recover the personal data whenever any thing wrong happens. All the risks we are not responsible.